Espacio publicitario

Want to Setup Netgear Extender Via WPS? Follow this Must-Read Guide

23 julio, 2021 in Sin categoría

To revamp the range of your existing WiFi network, you need to connect your Netgear range extender to your home router / modem. Using the WiFi Protected Setup method, you can complete the Netgear extender setup process in no time.

This particular post will guide you on how to perform the Netgear extender setup process with great ease. Let’s take the plunge!

How to Set up Netgear WiFi Range Extender Using the WPS Setup Method?

Netgear Extender Setup Using WPS Method

WPS or WiFi Protected Setup is one of the easiest methods to perform the Netgear extender setup process in a hassle-free way. To initiate the process, below are the steps that you need to follow to get the job done:

Step 1: Turn on your Netgear WiFi range extender. Before turning it on, we suggest you find a suitable location for your Netgear extender in your home.

Step 2: Make sure that your Netgear extender is receiving constant WiFi signals from your existing router/ modem. For this, you have to ensure that your existing router/ modem is placed openly on a clean and higher surface neither under a table nor inside a cabinet.

Step 3: Plug your Netgear WiFi extender into a damaged-free wall outlet.

Step 4: Wait for some time. Let the power LED on your Netgear extender become stable. If the power LED on your Netgear extender is taking ages to become stable, push the on/ off (power) button on it once.

Step 5: Afterward, locate the WPS button on your Netgear extender. Once found, push it gently and wait for the WPS LED start blinking.

Step 6: Now, push the WPS button on your existing router/ modem. Make sure that your device (router/ modem) is WPS-capable.

Step 7: When the WPS LED on your router/ modem starts blinking in green color, it means that the connection between your devices is successfully established.

On the off chance if the WPS LED on your Netgear extender or router is blinking in amber or red color, then you have to relocate your devices and initiate the Netgear extender setup process using the WPS method again. Once the WPS process gets completed successfully, we suggest you change the extender’s default settings by navigating to the mywifiext setup page using the default Netgear extender IP address.

Note: If your Netgear extender or your existing router/ modem don’t have the WPS button, then don’t worry. You can setup Netgear extender manually. To get the job done, follow the steps highlighted below:

Netgear Extender Setup Using the Manual Method

Step 1: Plug your Netgear extender in a working wall outlet that must be near to your main router/ modem.

Step 2 : Grab an Ethernet cable and connect your router and your extender with each other properly.

Step 3 : Turn on a WiFi-enabled device as per your liking and connect it to your extender’s WiFi.

Step 4 : Open a web browser and enter in the address bar.

Step 5 : Press Enter and you will be redirected to the Netgear Genie setup page. Here, you will get the easy steps to configure your Netgear extender with great ease.

If you don’t want to use the manual method to set up your Netgear WiFi range extender, download and install the Netgear app and follow the on-screen instructions.

Note : To revamp your WiFi experience, it is very important to perform the Netgear extender setup process correctly in exact given order.

Facing issues while setting up your Netgear WiFi range extender? If so, then rather than banging your head against a wall, it is always better to find a better deal with better option, what do you think? If you agree with us, then contact our competent technical experts right away via comments. We will be happy to answer and solve your queries.


4 Mistakes to Avoid When Performing Netgear Extender Setup

22 julio, 2021 in Sin categoría

Netgear extenders are one of the best networking devices in the WiFi industry nowadays. Setting up a Nighthawk extender in your house is quite easy. However, many users face plenty of issues while doing so. To ensure that you don’t have the same fate, we’ve mentioned some points in this article. Avoiding these points will help you in performing Netgear extender setup without any wanted hassle. Thus, scroll down, and read on.

What to Avoid While Performing Netgear Extender Setup?
Outlined below are the things that you need to avoid in order to successfully set up a Netgear Nighthawk extender in your house:

  1. Avoid Connecting Your Devices Wirelessly

One of the topmost things necessary during the process of Netgear Nighthawk extender setup is a strong internet connection. Therefore, it is recommended that you avoid connecting your Nighthawk extender to the router wirelessly. If you connect your devices wirelessly, chances are that you might get stuck with internet-related issues.
To make sure that this doesn’t happen, connect your Netgear extender to the WiFi router with an Ethernet cable. Just make sure that the cable you use doesn’t have any cuts, breakage, or any other damages.

  1. Avoid Making the Mistake of Using the Wrong Web Address

Half of the time, people face issues while trying to set up an extender is because of an incorrect web address. To prevent yourself from making the same mistake, avoid being careful while typing the default web address.

The default web address of your device is and the default IP address is In case you want a little more certainty regarding the default address of your extender, refer to the website of Netgear.

  1. Avoid Placing the Extender Near Electronic Devices

The location of your WiFi extender decides where you’ll face issues while trying to access the Netgear extender login page or not. Thus, make sure that you place your extender at its ideal location. Also, avoid the following points while choosing the right location for your device:

  • Do not place your device near wooden furniture.

  • Do not place your extender near electronic devices like cordless phones, washing machines, baby monitors, treadmills, televisions, microwave ovens, refrigerators, Bluetooth speakers, and much more.

  • Do not place your extender near reflexive surfaces like fish tanks and mirrors.

Along with keeping your extender away from electronic devices and metal objects, also keep it at a safe distance from corners and concrete walls. Otherwise, the WiFi signals of your Netgear range extender won’t take much time to get blocked.

  1. Avoid Using Incorrect Admin Details

Last but not least, avoid using incorrect default username and password. If you use incorrect Netgear login details, you won’t be able to finish the process of Netgear extender setup. So, make sure that the default admin credentials of your device are correct.

In case you need clarification regarding the default details of your device, it is recommended that you take a glance at the Netgear manual that came along with your device. You’ll find everything related to your extender in there.

The Bottom Line

So, this was all about the top 4 mistakes that you need to avoid while performing Netgear extender setup. We hope that this article will prevent you from committing silly mistakes like most users. In case you still need assistance regarding what to and what not to do while setting up a WiFi range extender, feel free to get in touch with our highly experienced technical experts. They won’t think twice before becoming your knight in shining armor. So, don’t hesitate to contact our technical team. Read about Netgear Admin page